Industry News- Shanghai Yessjet Precise Machinery Co., Ltd.

News Category

A 90 mm rigid PVC window profile that gauges within 0.05 mm on the bench can still fail at the cust...

Plastic Extrusion Tooling Design Guidelines: Die, Land Length and Tolerance

A 90 mm single-screw extruder running plasticized PVC over a 2.5 mm² conductor will hold jacket wal...

Plastic Extrusion Process Explained: Melt Control, Dies and Line Design

A 90 mm extruder rated at 380 kg/h for PVC sheathing often settles at 330 kg/h once the line runs t...

Choosing Screw Extruders for Cable Lines: Geometry, Output and Payback

Two hours into a night shift, a 90 mm extruder running a 1 kV LLDPE-insulated cable started produci...

LLDPE Temperature Range in Cable Extrusion: Barrel, Die and Melt Limits

A cable plant runs a jacket job on linear low-density polyethylene with a barrel profile left over ...

LLDPE Melting Point: DSC Ranges, Grade Comparison, and Cable Extrusion Settings

At 06:40 the line stopped. A 90 mm PVC extruder that had been running 2.5 sq mm building wire at 78...

Heater Extruder Not Heating at Expected Rate: Causes, Diagnostic Tests and Fixes

A cable plant replacing the screw on a rigid PVC insulation line once ordered a 4.0 compression rat...

Extrusion Screw Compression Ratio: How to Match It to Your Cable Compound

A 70 mm PVC insulation line running at 300 m/min produces roughly 36 km of insulated core in a two-...

Extrusion Process Control: How Temperature, Tension and Line Speed Interact

A cable processor in Southeast Asia recently swapped an extrusion-grade polyethylene compound for a...

Extrusion Grade Polymers: Selection and Processing Guide for Cable Makers

Cable makers often compare extrusion equipment by screw diameter, motor rating, or claimed speed fi...

Extrusion Equipment Selection Guide: Cable Manufacturers’ Buying Factors

A cable plant running PVC jacket extrusion at 180°C began seeing pitting on the screw and barrel af...

Chemical Resistant Extrusion Machine: Material Selection and Equipment Design Guide

PVC Extrusion Process: The Complete Data-Driven Guide for Industrial Buyers The PVC extrusion proce...

PVC Extrusion Process Guide: Data, Costs & Best Practices for 2026

Two plants can run the same PVC compound on similar extrusion equipment and end up with very differ...

Wire Extrusion Explained: Process, Equipment & Line Selection Guide

Start with the Part That Keeps Failing A project manager orders a 1.5-meter polycarbonate profile f...

Polycarbonate Extrusion Profiles: Process, Properties, and Equipment Guide

High-Performance Production Systems Wire Harness Production: Engineering High-Performance Manufactu...

Wire Harness Production Systems: High-Performance Manufacturing Guide

Products Insights