Heat Shrink Packing Machines for Cable and Wire Bundles Factory

Heat Shrink Packing Machines for Cable and Wire Bundles

-- Steady & Reliable Manufacturer --

Introduction

Once a cable or wire reel comes off the coiling line, the last thing standing between it and a long sea or land freight journey is the outer wrap. A heat shrink packing machine wraps the finished reel in a shrink film, then passes it through a heated tunnel where the film contracts tightly around the coil, sealing out moisture, dust, and the kind of surface abrasion that shows up after weeks in a container.

The machine itself sits at the point where packaging becomes a process rather than a manual task: a sensor centers the reel before the film is applied, the tunnel temperature is set for the specific film type in use, and the reel passes through at a speed calibrated to the film thickness and reel diameter. PE film and POF film both run on the same equipment, with different tunnel settings for each.

In a full finishing line, this station typically follows auto-coiling or cross-wire take-up and precedes palletizing, closing the loop between a finished coil and a shipment-ready pallet.

Specifications

Attribute Detail
Film compatibility PE shrink film and POF shrink film
Tunnel temperature range 120 to 220 degrees Celsius, adjustable by film type
Reel diameter range Approximately 200 to 1000 millimeters, model dependent
Wrapping cycle time Approximately 15 to 40 seconds per reel
Power supply 380V three-phase, standard export configuration
Control system PLC touchscreen with stored recipes per film and reel size
Line integration Inline with an existing coiling line or run as a standalone unit

Advantages

Superior Protection

A sealed shrink film barrier protects against moisture and dust through extended transit times

Tighter Packaging

Machine-applied film sits tighter than hand wrapping, which reduces reel shifting inside packaging

Size Flexibility

An adjustable tunnel accommodates a range of reel sizes without swapping equipment

Faster Production

Cycle times are faster and more consistent than manual wrapping by hand

Better Stacking

Even shrink tension across the film improves how reels sit and stack once palletized

Application

Long-Distance Freight

Cable and wire finishing lines preparing reels for long-distance sea or land freight

Production Line Integration

Reel bundling immediately ahead of palletizing at the end of a production line

Outdoor Storage

Protective wrapping for reels destined for outdoor or uncovered warehouse storage

Flexible Operations

Finishing stations that need one machine to handle several reel sizes without changeover

Export Production

Export-focused production runs where moisture ingress during transit is a recurring complaint

Core Features

  • Sensor-guided reel centering before the film is applied
  • Adjustable heat tunnel with multiple temperature zones
  • Stored recipes for different film and reel size combinations
  • Touchscreen PLC control panel for operator setup and monitoring
  • Optional inline conveyor connection to an upstream coiling machine
  • Q: What size reels can a heat shrink packing machine handle?
  • A: Reel diameter range depends on the specific model, typically spanning roughly 200 to 1000 millimeters, with the tunnel and film feed adjusted to match.
  • Q: Can this machine connect to an existing coiling line?
  • A: Yes, it can run inline with a conveyor feed from an upstream coiling or take-up machine, or operate as a standalone station fed manually.
  • Q: What type of film does the machine use?
  • A: PE shrink film and POF shrink film are both supported, with tunnel temperature and speed adjusted per film type through stored recipes.
  • Q: How does heat shrink wrapping compare to manual wrapping for export shipments?
  • A: Machine-applied film gives a tighter, more even wrap and a faster, more repeatable cycle time than wrapping reels by hand, which matters most on long transit routes.

Our Service Process

01

Consultation

Discuss your production requirements and technical specifications

02

Solution Design

Customized machinery proposal tailored to your needs

03

Manufacturing

Precision engineering and quality control at our facility

04

Installation

On-site installation and commissioning by our engineers

05

Training

Comprehensive operator training and technical support

Shanghai Yessjet Precise Machinery Co., Ltd.
Precision Machinery, Intelligent Solutions Powering Cable Production Worldwide
Shanghai Yessjet Precise Machinery Co., Ltd. was established in Shanghai with investment from Taiwan in 2002 as a professional manufacturer dedicated to the research and development of wire and cable machinery. In 2017, to expand the company's scale, Jiangsu Yessjet Precise Machinery Co., Ltd. was established with investment in Yixing, Wuxi, Jiangsu.

We specialize in designing and manufacturing high-performance production systems — from extrusion lines and automatic coiling machines to robotic palletizing solutions — helping customers achieve efficiency, flexibility, and sustainable growth. As China Heat Shrink Packing Machines for Cable and Wire Bundles Manufacturers and China Heat Shrink Packing Machines for Cable and Wire Bundles Manufacturers, we provide professional on-site installation and system commissioning services to ensure rapid equipment startup and stable operation. We also conduct operator training to guarantee efficient production line launch.We offer customized retrofit solutions. Through partial upgrades or automated integration, we help clients enhance production capacity, precision, and intelligent capabilities to maximize return on investment.
View More
YESSJET

Ready to Upgrade Your Cable Production Line?

Contact our engineering team today for a free consultation, customized machinery proposal, and factory tour arrangement.

Request a Quote Explore Our Factory

Related Tags

X Facebook
Products Insights